SULKY TOTALLY STABLE white, 25cm x 10m

Product number: 3000011

Size/Make-up:

25cm x 10m

Color number:

0001
Size/Make-up
Color number

€17.00*

Content: 2.5 m² (€6.80* / 1 m²)

Available, delivery time 1-3 days

Bulk prices are calculated when selecting the amount

Product information "SULKY TOTALLY STABLE white, 25cm x 10m"

Temporary, Iron-On, Tear Away Stabiliser

SULKY TOTALLY STABLE is an iron-on, tear-away stabiliser that is perfect for stretchy fabrics. TOTALLY STABLE "totally" stabilises in seconds with no time-consuming pinning. Eliminates shifting, sliding and puckering, then tears away easily, leaving no sticky residue. It can be lifted and re-ironed many times. For denser embroidery, two layers are ironed onto the back of the fabric to ensure optimal stabilization during the embroidery process.

  • Easily tearable embroidery and sewing stabiliser for stretchy fabrics
  • Iron-on application
  • due to the weak adhesive strength, any excess stabiliser can be easily removed
  • available in black and white
  • Vegan

Suitable for:

  • Monogramming
  • Decorative Stitching
  • Fabric Stamping
  • buttonholes in stretchy fabrics
  • machine and hand sewn appliqués s
  • Stenciled Borders
  • Stretchy or delicate Fabrics
  • Quilt Templates


Weight:
48 g/m²

Material Composition: 75-80% Cellulose, 20-25% Polyester, coating: 100% Polyethylene

Öko-Tex certified:

Label_FE_PK1_EAA 14318_28x14mm_GREEN_PNG.png

SULKY® TOTALLY STABLE

Note: Do not use on nylon or lycra because these fabrics melt at a very low temperature causing them to bond permanently.


SULKY® TEAR AWAY is the optimal stabiliser for the following techniques:

Machine Embroidery:
1. To prevent stretchy fabrics from warping during embroidery, iron TOTALLY STABLE onto the back of the fabric with the coated (shiny) side facing down, applying light pressure (iron setting: 2 dots).
2. Hoop your fabric together with the stabiliser tightly so it‘s taut like a drum; stabiliser is on the bottom.
3. Choose a stunning embroidery design digitized with the correct stitch density (not too dense) and load it into your embroidery machine.
4. Embroider your design.
5. Once the project is completed, carefully remove TOTALLY STABLE from the back.

Machine Appliqué:
1. Attach your design with the help of THERMOFIX on your base material
2. Iron a piece of TOTALLY STABLE that is slightly larger than your appliqué area behind your base fabric to prevent puckering.
3. Stitch around raw edges using a satin stich.
4. After stitching, carefully remove TOTALLY STABLE from the back.

Hand appliqué:
1. Trace the appliqué pattern onto the uncoated side of TOTALLY STABLE and cut it out.
2. Iron the cut-out appliqué onto the right side of the appliqué fabric and cut it out, allowing for a seam allowance.
3. Secure the appliqué to the backing fabric with small basting stitches, then sew it on. As you sew, gradually fold the seam allowance under the appliqué design.
4. After sewing, carefully peel off the TOTALLY STABLE.

Free Motion Machine Appliqué:
1. Pick a design, then using THERMOFIX attach fabric pieces onto a matching base fabric.
2. Iron a piece of TOTALLY STABLE that is slightly larger than your appliqué area behind your base. If you want to turn your sewing machine into a paint brush, you will be on the safe side with 2 layers of TOTALLY STABLE.
3. Stitch all around ironed-on fabric pieces. Embellish base fabric in between and add shapes and lines.
4. Once the project is completed, carefully remove TOTALLY STABLE from the back

Sewing Buttonholes Without Interfacing:
1. Iron TOTALLY STABLE on the wrong side of the buttonhole position.
2. Sew thebuttonhole without any distortion of your stretchy fabric.
3. After stitching, carefully remove TOTALLY STABLE.

For further information on all our stabilisers and helpful hints we recommend our SULKY STARTER KIT STABILISER.

Herstellerangaben gemäß GPSR-Anforderungen (General Product Safety Regulation)

Gunold GmbH
Obernburger Str. 125 | 63811 Stockstadt | Germany

E-Mail: service@sulky-shop.de